Fuzzy Control Language, or FCL, is a language for implementing fuzzy logic, especially fuzzy control. It was standardized by IEC 61131-7. It is a domain-specific programming language: it has no features unrelated to fuzzy logic, so it is impossible to even print "Hello, world!". Therefore, one does not write a program in FCL, but one may write part of it in FCL. == Example == RULE 0: IF (temperature IS cold) THEN (output IS low) RULE 1: IF (temperature IS very cold) THEN (output IS high) == Limitations == FCL is not an entirely complete fuzzy language, for instance, it does not support "hedges", which are adverbs that modify the set. For instance, the programmer cannot write: RULE 0: If (Temperature is VERY COLD) then (Output is VERY HIGH) However, the programmer can simply define new sets for "very cold" and "very high". FCL also lacks support for higher-order fuzzy sets, subsets, and so on. None of these features are essential to fuzzy control, although they may be nice to have.
Electronic business
Electronic business (also known as online business or e-business) is any kind of business or commercial activity that includes sharing information across the internet. Commerce constitutes the exchange of products and services between businesses, groups, and individuals; and can be seen as one of the essential activities of any business. E-commerce focuses on the use of ICT to enable the external activities and relationships of the business with individuals, groups, and other organizations, while e-business does not only deal with online commercial operations of enterprises, but also deals with their other organizational matters such as human resource management and production. The term "e-business" was coined by IBM's marketing and Internet team in 1996. == Market participants == Electronic business can take place between a very large number of market participants; it can be between business and consumer, private individuals, public administrations, or any other organizations such as non-governmental organizations (NGOs). These various market participants can be divided into three main groups: Business (B) Consumer (C) Administration (A) All of them can be either buyers or service providers within the market. There are nine possible combinations for electronic business relationships. B2C and B2B belong to E-commerce, while A2B and A2A belong to the E-government sector which is also a part of the electronic business. == History == One of the founding pillars of electronic business was the development of the Electronic Data Interchange (EDI) electronic data interchange. This system replaced traditional mailing and faxing of documents with a digital transfer of data from one computer to another, without any human intervention. Michael Aldrich is considered the developer of the predecessor to online shopping. In 1979, the entrepreneur connected a television set to a transaction processing computer with a telephone line and called it "teleshopping", meaning shopping at distance. From the mid-nineties, major advancements were made in the commercial use of the Internet. Amazon, which launched in 1995, started as an online bookstore and grew to become nowadays the largest online retailer worldwide, selling food, toys, electronics, apparel and more. Other successful stories of online marketplaces include eBay or Etsy. In 1994, IBM, with its agency Ogilvy & Mather, began to use its foundation in IT solutions and expertise to market itself as a leader of conducting business on the Internet through the term "e-business." Then CEO Louis V. Gerstner, Jr. was prepared to invest $1 billion to market this new brand. After conducting worldwide market research in October 1997, IBM began with an eight-page piece in The Wall Street Journal that would introduce the concept of "e-business" and advertise IBM's expertise in the new field. IBM decided not to trademark the term "e-business" in the hopes that other companies would use the term and create an entirely new industry. However, this proved to be too successful and by 2000, to differentiate itself, IBM launched a $300 million campaign about its "e-business infrastructure" capabilities. Since that time, the terms, "e-business" and "e-commerce" have been loosely interchangeable and have become a part of the common vernacular. According to the U.S. Department Of Commerce, the estimated retail e-commerce sales in Q1 2020 were representing almost 12% of total U.S. retail sales, against 4% for Q1 2010. == Business model == The transformation toward e-business is complex and in order for it to succeed, there is a need to balance between strategy, an adapted business model (e-intermediary, marketplaces), right processes (sales, marketing) and technology (Supply Chain Management, Customer Relationship Management). When organizations go online, they have to decide which e-business models best suit their goals. A business model is defined as the organization of product, service and information flows, and the source of revenues and benefits for suppliers and customers. The concept of the e-business model is the same but used in online presence. === Revenue model === A key component of the business model is the revenue model or profit model, which is a framework for generating revenues. It identifies which revenue source to pursue, what value to offer, how to price the value, and who pays for the value. It is a key component of a company's business model. It primarily identifies what product or service will be created in order to generate revenues and the ways in which the product or service will be sold. Without a well-defined revenue model, that is, a clear plan of how to generate revenues, new businesses will more likely struggle due to costs that they will not be able to sustain. By having a revenue model, a business can focus on a target audience, fund development plans for a product or service, establish marketing plans, begin a line of credit and raise capital. ==== E-commerce ==== E-commerce (short for "electronic commerce") is trading in products or services using computer networks, such as the Internet. Electronic commerce draws on technologies such as mobile commerce, electronic funds transfer, supply chain management, Internet marketing, online transaction processing, electronic data interchange (EDI), inventory management systems, and automated data collection. Modern electronic commerce typically uses the World Wide Web for at least one part of the transaction's life cycle, although it may also use other technologies such as e-mail. == Concerns == While much has been written of the economic advantages of Internet-enabled commerce, there is also evidence that some aspects of the internet such as maps and location-aware services may serve to reinforce economic inequality and the digital divide. Electronic commerce may be responsible for consolidation and the decline of mom-and-pop, brick and mortar businesses resulting in increases in income inequality. === Security === E-business systems naturally have greater security risks than traditional business systems, therefore it is important for e-business systems to be fully protected against these risks. A far greater number of people have access to e-businesses through the internet than would have access to a traditional business. Customers, suppliers, employees, and numerous other people use any particular e-business system daily and expect their confidential information to stay secure. Hackers are one of the great threats to the security of e-businesses. Some common security concerns for e-Businesses include keeping business and customer information private and confidential, the authenticity of data, and data integrity. Some of the methods of protecting e-business security and keeping information secure include physical security measures as well as data storage, data transmission, anti-virus software, firewalls, and encryption to list a few. ==== Privacy and confidentiality ==== Confidentiality is the extent to which businesses makes personal information available to other businesses and individuals. With any business, confidential information must remain secure and only be accessible to the intended recipient. However, this becomes even more difficult when dealing with e-businesses specifically. To keep such information secure means protecting any electronic records and files from unauthorized access, as well as ensuring safe transmission and data storage of such information. Tools such as encryption and firewalls manage this specific concern within e-business. ==== Authenticity ==== E-business transactions pose greater challenges for establishing authenticity due to the ease with which electronic information may be altered and copied. Both parties in an e-business transaction want to have the assurance that the other party is who they claim to be, especially when a customer places an order and then submits a payment electronically. One common way to ensure this is to limit access to a network or trusted parties by using a virtual private network (VPN) technology. The establishment of authenticity is even greater when a combination of techniques are used, and such techniques involve checking "something you know" (i.e. password or PIN), "something you need" (i.e. credit card), or "something you are" (i.e. digital signatures or voice recognition methods). Many times in e-business, however, "something you are" is pretty strongly verified by checking the purchaser's "something you have" (i.e. credit card) and "something you know" (i.e. card number). ==== Data integrity ==== Data integrity answers the question "Can the information be changed or corrupted in any way?" This leads to the assurance that the message received is identical to the message sent. A business needs to be confident that data is not changed in transit, whether deliberately or by accident. To help with data integrity, firewalls protect stored data against unauthorized access, while
Physical access
Physical access is a term in computer security that refers to the ability of people to physically gain access to a computer system. According to Gregory White, "Given physical access to an office, the knowledgeable attacker will quickly be able to find the information needed to gain access to the organization's computer systems and network." == Attacks and countermeasures == === Attacks === Physical access opens up a variety of avenues for hacking. Michael Meyers notes that "the best network software security measures can be rendered useless if you fail to physically protect your systems," since an intruder could simply walk off with a server and crack the password at his leisure. Physical access also allows hardware keyloggers to be installed. An intruder may be able to boot from a CD or other external media and then read unencrypted data on the hard drive. They may also exploit a lack of access control in the boot loader; for instance, pressing F8 while certain versions of Microsoft Windows are booting, specifying 'init=/bin/sh' as a boot parameter to Linux (usually done by editing the command line in GRUB), etc. One could also use a rogue device to access a poorly secured wireless network; if the signal were sufficiently strong, one might not even need to breach the perimeter. === Countermeasures === IT security standards in the United States typically call for physical access to be limited by locked server rooms, sign-in sheets, etc. Physical access systems and IT security systems have historically been administered by separate departments of organizations, but are increasingly being seen as having interdependent functions needing a single, converged security policy. An IT department could, for instance, check security log entries for suspicious logons occurring after business hours, and then use keycard swipe records from a building access control system to narrow down the list of suspects to those who were in the building at that time. Surveillance cameras might also be used to deter or detect unauthorized access.
Tessellation (computer graphics)
In computer graphics, tessellation is the dividing of datasets of polygons (sometimes called vertex sets) presenting objects in a scene into suitable structures for rendering. Especially for real-time rendering, data is tessellated into triangles, for example in OpenGL 4.0 and Direct3D 11. == In graphics rendering == A key advantage of tessellation for realtime graphics is that it allows detail to be dynamically added and subtracted from a 3D polygon mesh and its silhouette edges based on control parameters (often camera distance). In previously leading realtime techniques such as parallax mapping and bump mapping, surface details could be simulated at the pixel level, but silhouette edge detail was fundamentally limited by the quality of the original dataset. In Direct3D 11 pipeline (a part of DirectX 11), the graphics primitive is the patch. The tessellator generates a triangle-based tessellation of the patch according to tessellation parameters such as the TessFactor, which controls the degree of fineness of the mesh. The tessellation, along with shaders such as a Phong shader, allows for producing smoother surfaces than would be generated by the original mesh. By offloading the tessellation process onto the GPU hardware, smoothing can be performed in real time. Tessellation can also be used for implementing subdivision surfaces, level of detail scaling and fine displacement mapping. OpenGL 4.0 uses a similar pipeline, where tessellation into triangles is controlled by the Tessellation Control Shader and a set of four tessellation parameters. == In computer-aided design == In computer-aided design the constructed design is represented by a boundary representation topological model, where analytical 3D surfaces and curves, limited to faces, edges, and vertices, constitute a continuous boundary of a 3D body. Arbitrary 3D bodies are often too complicated to analyze directly. So they are approximated (tessellated) with a mesh of small, easy-to-analyze pieces of 3D volume—usually either irregular tetrahedra, or irregular hexahedra. The mesh is used for finite element analysis. The mesh of a surface is usually generated per individual faces and edges (approximated to polylines) so that original limit vertices are included into mesh. To ensure that approximation of the original surface suits the needs of further processing, three basic parameters are usually defined for the surface mesh generator: The maximum allowed distance between the planar approximation polygon and the surface (known as "sag"). This parameter ensures that mesh is similar enough to the original analytical surface (or the polyline is similar to the original curve). The maximum allowed size of the approximation polygon (for triangulations it can be maximum allowed length of triangle sides). This parameter ensures enough detail for further analysis. The maximum allowed angle between two adjacent approximation polygons (on the same face). This parameter ensures that even very small humps or hollows that can have significant effect to analysis will not disappear in mesh. An algorithm generating a mesh is typically controlled by the above three and other parameters. Some types of computer analysis of a constructed design require an adaptive mesh refinement, which is a mesh made finer (using stronger parameters) in regions where the analysis needs more detail.
Two-phase locking
In databases and transaction processing, two-phase locking (2PL) is a pessimistic concurrency control method that guarantees conflict-serializability. It is also the name of the resulting set of database transaction schedules (histories). The protocol uses locks, applied by a transaction to data, which may block (interpreted as signals to stop) other transactions from accessing the same data during the transaction's life. By the 2PL protocol, locks are applied and removed in two phases: Expanding phase: locks are acquired and no locks are released. Shrinking phase: locks are released and no locks are acquired. Two types of locks are used by the basic protocol: Shared and Exclusive locks. Refinements of the basic protocol may use more lock types. Using locks that block processes, 2PL, S2PL, and SS2PL may be subject to deadlocks that result from the mutual blocking of two or more transactions. == Read and write locks == Locks are used to guarantee serializability. A transaction is holding a lock on an object if that transaction has acquired a lock on that object which has not yet been released. For 2PL, the only used data-access locks are read-locks (shared locks) and write-locks (exclusive locks). Below are the rules for read-locks and write-locks: A transaction is allowed to read an object if and only if it is holding a read-lock or write-lock on that object. A transaction is allowed to write an object if and only if it is holding a write-lock on that object. A schedule (i.e., a set of transactions) is allowed to hold multiple locks on the same object simultaneously if and only if none of those locks are write-locks. If a disallowed lock attempts on being held simultaneously, it will be blocked. == Variants == Note that all conflict serializable schedules are also view serializable (but not vice-versa). === Two-phase locking === According to the two-phase locking protocol, each transaction handles its locks in two distinct, consecutive phases during the transaction's execution: Expanding phase (aka Growing phase): locks are acquired and no locks are released (the number of locks can only increase). Shrinking phase (aka Contracting phase): locks are released and no locks are acquired. The two phase locking rules can be summarized as: each transaction must never acquire a lock after it has released a lock. The serializability property is guaranteed for a schedule with transactions that obey this rule. Typically, without explicit knowledge in a transaction on end of phase 1, the rule is safely determined only when a transaction has completed processing and requested commit. In this case, all the locks can be released at once (phase 2). === Conservative two-phase locking === Conservative two-phase locking (C2PL) differs from 2PL in that transactions obtain all the locks they need before the actual execution begins. This is to ensure that a transaction that already holds some locks will not block waiting for other locks. C2PL prevents deadlocks. In cases of heavy lock contention, C2PL reduces the time locks are held on average, relative to 2PL and Strict 2PL, because transactions that hold locks are never blocked. In light lock contention, C2PL holds more locks than is necessary, because it is difficult to predict which locks will be needed in the future, thus leading to higher overhead. A C2PL transaction will not obtain any locks if it cannot obtain all the locks it needs in its initial request. Furthermore, each transaction needs to declare its read and write set (the data items that will be read/written), which is not always possible. Because of these limitations, C2PL is not used very frequently. === Strict two-phase locking === To comply with the strict two-phase locking (S2PL) protocol, a transaction needs to comply with 2PL, and release its write (exclusive) locks only after the transaction has ended (i.e., either committed or aborted). On the other hand, read (shared) locks are released regularly during the shrinking phase. Unlike 2PL, S2PL provides strictness (a special case of cascade-less recoverability). This protocol is not appropriate in B-trees because it causes Bottleneck (while B-trees always starts searching from the parent root). === Strong strict two-phase locking === or Rigorousness, or Rigorous scheduling, or Rigorous two-phase locking To comply with strong strict two-phase locking (SS2PL), a transaction's read and write locks are released only after that transaction has ended (i.e., either committed or aborted). A transaction obeying SS2PL has only a phase 1 and lacks a phase 2 until the transaction has completed. Every SS2PL schedule is also an S2PL schedule, but not vice versa.
Motor theory of speech perception
The motor theory of speech perception is the hypothesis that people perceive spoken words by identifying the vocal tract gestures with which they are pronounced rather than by identifying the sound patterns that speech generates. It originally claimed that speech perception is done through a specialized module that is innate and human-specific. Though the idea of a module has been qualified in more recent versions of the theory, the idea remains that the role of the speech motor system is not only to produce speech articulations but also to detect them. The hypothesis has gained more interest outside the field of speech perception than inside. This has increased particularly since the discovery of mirror neurons that link the production and perception of motor movements, including those made by the vocal tract. The theory was initially proposed in the Haskins Laboratories in the 1950s by Alvin Liberman and Franklin S. Cooper, and developed further by Donald Shankweiler, Michael Studdert-Kennedy, Ignatius Mattingly, Carol Fowler and Douglas Whalen. == Origins and development == The hypothesis has its origins in research using pattern playback to create reading machines for the blind that would substitute sounds for orthographic letters. This led to a close examination of how spoken sounds correspond to the acoustic spectrogram of them as a sequence of auditory sounds. This found that successive consonants and vowels overlap in time with one another (a phenomenon known as coarticulation). This suggested that speech is not heard like an acoustic "alphabet" or "cipher," but as a "code" of overlapping speech gestures. === Associationist approach === Initially, the theory was associationist: infants mimic the speech they hear and that this leads to behavioristic associations between articulation and its sensory consequences. Later, this overt mimicry would be short-circuited and become speech perception. This aspect of the theory was dropped, however, with the discovery that prelinguistic infants could already detect most of the phonetic contrasts used to separate different speech sounds. === Cognitivist approach === The behavioristic approach was replaced by a cognitivist one in which there was a speech module. The module detected speech in terms of hidden distal objects rather than at the proximal or immediate level of their input. The evidence for this was the research finding that speech processing was special such as duplex perception. === Changing distal objects === Initially, speech perception was assumed to link to speech objects that were both the invariant movements of speech articulators the invariant motor commands sent to muscles to move the vocal tract articulators This was later revised to include the phonetic gestures rather than motor commands, and then the gestures intended by the speaker at a prevocal, linguistic level, rather than actual movements. === Modern revision === The "speech is special" claim has been dropped, as it was found that speech perception could occur for nonspeech sounds (for example, slamming doors for duplex perception). === Mirror neurons === The discovery of mirror neurons has led to renewed interest in the motor theory of speech perception, and the theory still has its advocates, although there are also critics. == Support == === Nonauditory gesture information === If speech is identified in terms of how it is physically made, then nonauditory information should be incorporated into speech percepts even if it is still subjectively heard as "sounds". This is, in fact, the case. The McGurk effect shows that seeing the production of a spoken syllable that differs from an auditory cue synchronized with it affects the perception of the auditory one. In other words, if someone hears "ba" but sees a video of someone pronouncing "ga", what they hear is different—some people believe they hear "da". People find it easier to hear speech in noise if they can see the speaker. People can hear syllables better when their production can be felt haptically. === Categorical perception === Using a speech synthesizer, speech sounds can be varied in place of articulation along a continuum from /bɑ/ to /dɑ/ to /ɡɑ/, or in voice onset time on a continuum from /dɑ/ to /tɑ/ (for example). When listeners are asked to discriminate between two different sounds, they perceive sounds as belonging to discrete categories, even though the sounds vary continuously. In other words, 10 sounds (with the sound on one extreme being /dɑ/ and the sound on the other extreme being /tɑ/, and the ones in the middle varying on a scale) may all be acoustically different from one another, but the listener will hear all of them as either /dɑ/ or /tɑ/. Likewise, the English consonant /d/ may vary in its acoustic details across different phonetic contexts (the /d/ in /du/ does not technically sound the same as the one in /di/, for example), but all /d/'s as perceived by a listener fall within one category (voiced alveolar plosive) and that is because "linguistic representations are abstract, canonical, phonetic segments or the gestures that underlie these segments." This suggests that humans identify speech using categorical perception, and thus that a specialized module, such as that proposed by the motor theory of speech perception, may be on the right track. === Speech imitation === If people can hear the gestures in speech, then the imitation of speech should be very fast, as in when words are repeated that are heard in headphones as in speech shadowing. People can repeat heard syllables more quickly than they would be able to produce them normally. === Speech production === Hearing speech activates vocal tract muscles, and the motor cortex and premotor cortex. The integration of auditory and visual input in speech perception also involves such areas. Disrupting the premotor cortex disrupts the perception of speech units such as plosives. The activation of the motor areas occurs in terms of the phonemic features which link with the vocal track articulators that create speech gestures. The perception of a speech sound is aided by pre-emptively stimulating the motor representation of the articulators responsible for its pronunciation . Auditory and motor cortical coupling is restricted to a specific range of neuronal firing frequency. === Perception-action meshing === Evidence exists that perception and production are generally coupled in the motor system. This is supported by the existence of mirror neurons that are activated both by seeing (or hearing) an action and when that action is carried out. Another source of evidence is that for common coding theory between the representations used for perception and action. == Criticisms == The motor theory of speech perception is not widely held in the field of speech perception, though it is more popular in other fields, such as theoretical linguistics. As three of its advocates have noted, "it has few proponents within the field of speech perception, and many authors cite it primarily to offer critical commentary".p. 361 Several critiques of it exist. === Multiple sources === Speech perception is affected by nonproduction sources of information, such as context. Individual words are hard to understand in isolation but easy when heard in sentence context. It therefore seems that speech perception uses multiple sources that are integrated together in an optimal way. === Production === The motor theory of speech perception would predict that speech motor abilities in infants predict their speech perception abilities, but in actuality it is the other way around. It would also predict that defects in speech production would impair speech perception, but they do not. However, this only affects the first and already superseded behaviorist version of the theory, where infants were supposed to learn all production-perception patterns by imitation early in childhood. This is no longer the mainstream view of motor-speech theorists. === Speech module === Several sources of evidence for a specialized speech module have failed to be supported. Duplex perception can be observed with door slams. The McGurk effect can also be achieved with nonlinguistic stimuli, such as showing someone a video of a basketball bouncing but playing the sound of a ping-pong ball bouncing. As for categorical perception, listeners can be sensitive to acoustic differences within single phonetic categories. As a result, this part of the theory has been dropped by some researchers. === Sublexical tasks === The evidence provided for the motor theory of speech perception is limited to tasks such as syllable discrimination that use speech units not full spoken words or spoken sentences. As a result, "speech perception is sometimes interpreted as referring to the perception of speech at the sublexical level. However, the ultimate goal of these studies is presumably to understand the neural processes supporting the ability to process spee
Security of the Java software platform
The Java software platform provides a number of features designed for improving the security of Java applications. This includes enforcing runtime constraints through the use of the Java Virtual Machine (JVM), a security manager that sandboxes untrusted code from the rest of the operating system, and a suite of security APIs that Java developers can utilise. Despite this, criticism has been directed at the programming language, and Oracle, due to an increase in malicious programs that revealed security vulnerabilities in the JVM, which were subsequently not properly addressed by Oracle in a timely manner. == Security features == === The JVM === The binary form of programs running on the Java platform is not native machine code but an intermediate bytecode. The JVM performs verification on this bytecode before running it to prevent the program from performing unsafe operations such as branching to incorrect locations, which may contain data rather than instructions. It also allows the JVM to enforce runtime constraints such as array bounds checking. This means that Java programs are significantly less likely to suffer from memory safety flaws such as buffer overflow than programs written in languages such as C which do not provide such memory safety guarantees. The platform does not allow programs to perform certain potentially unsafe operations such as pointer arithmetic or unchecked type casts. It manages memory allocation and initialization and provides automatic garbage collection which in many cases (but not all) relieves the developer from manual memory management. This contributes to type safety and memory safety. === Security manager === The platform provides a security manager which allows users to run untrusted bytecode in a "sandboxed" environment designed to protect them from malicious or poorly written software by preventing the untrusted code from accessing certain platform features and APIs. For example, untrusted code might be prevented from reading or writing files on the local filesystem, running arbitrary commands with the current user's privileges, accessing communication networks, accessing the internal private state of objects using reflection, or causing the JVM to exit. The security manager also allows Java programs to be cryptographically signed; users can choose to allow code with a valid digital signature from a trusted entity to run with full privileges in circumstances where it would otherwise be untrusted. Users can also set fine-grained access control policies for programs from different sources. For example, a user may decide that only system classes should be fully trusted, that code from certain trusted entities may be allowed to read certain specific files, and that all other code should be fully sandboxed. === Security APIs === The Java Class Library provides a number of APIs related to security, such as standard cryptographic algorithms, authentication, and secure communication protocols. === The sun.misc.Unsafe class === sun.misc.Unsafe is an internal utility class in the Java programming language which is a collection of low-level unsafe operations. While it is not a part of the official Java Class Library, it is called internally by the Java libraries. It resides in an unofficial Java module named jdk.unsupported. Beginning in Java 11, it has been partially migrated to jdk.internal.misc.Unsafe (which resides in module java.base). Its primary feature is to allow direct memory management (similar to C memory management) and memory address manipulation, manipulating objects and fields, thread manipulation, and concurrency primitives. Its declaration is: public final class Unsafe;, and it is a singleton class with a private constructor. It contains the following methods, many of which are declared native (invoking Java Native Interface): static Unsafe getUnsafe(): retrieves the Unsafe instance. It uses sun.reflect.Reflection to do so. int getInt(Object o, long offset): fetches a value (a field or array element) in the object at the given offset. (There are corresponding getBoolean(), getByte(), getShort(), getChar(), getLong(), getFloat(), and getDouble() methods as well.) void putInt(Object o, long offset, int x): stores a value into an object at the given offset. (There are corresponding putBoolean(), putByte(), putShort(), putChar(), putLong(), putFloat(), and putDouble() methods as well.) Object getObject(Object o, long offset): fetches a reference value from an object at the given offset. void putObject(Object o, long offset, Object x): stores a reference value into an object at the given offset. int getInt(long address): fetches a value at the given address. (There are corresponding getBoolean(), getByte(), getShort(), getChar(), getLong(), getFloat(), and getDouble() methods as well.) void putInt(long address, int x): stores a value into the given address. (There are corresponding putBoolean(), putByte(), putShort(), putChar(), putLong(), putFloat(), and putDouble() methods as well.) long getAddress(long address): fetches a native pointer from a given address. void putAddress(long address, long x): stores a native pointer into a given address. long allocateMemory(long bytes): allocates a block of native memory of the given size (similar to malloc()). long reallocateMemory(long address, long bytes): resizes a block of native memory to the given size (similar to realloc()). void setMemory(Object o, long offset, long bytes, byte value), void setMemory(long address, long bytes, byte value): sets all bytes in a block of memory to a fixed value (similar to memset()). void copyMemory(Object srcBase, long srcOffset, Object destBase, long destOffset, long bytes), void copyMemory(long srcAddress, long destAddress, long bytes): sets all bytes in a given block of memory to a copy of another block (similar to memcpy()). void freeMemory(long address): deallocates a block of native memory obtained from allocateMemory() or reallocateMemory(), similar to free()). long staticFieldOffset(Field f): obtains the location of a given field in the storage allocation of its class. long objectFieldOffset(Field f): obtains the location of a given static field in conjunction with staticFieldBase(). Object staticFieldBase(Field f): obtains the location of a given static field in conjunction with staticFieldOffset(). void ensureClassInitialized(Class c): ensures the given class has been initialized. int arrayBaseOffset(Class arrayClass): obtains the offset of the first element in the storage allocation of a given array class. int arrayIndexScale(Class arrayClass): obtains the scale factor for addressing elements in the storage allocation of a given array class. static int addressSize(): obtains the size (in bytes) of a native pointer. int pageSize(): obtains the size (in bytes) of a native memory page. Class defineClass(String name, byte[] b, int off, int len, ClassLoader loader, ProtectionDomain protectionDomain): signals to the JVM to define a class without security checks. Class defineAnonymousClass(Class hostClass, byte[] data, Object[] cpPatches): signals to the JVM to define a class but do not make it known to the class loader or system directory. Object allocateInstance(Class cls) throws InstantiationException: allocates an instance of a class without running its constructor. void monitorEnter(Object o): locks an object. void monitorExit(Object o): unlocks an object. boolean tryMonitorEnter(Object o): tries to lock an object, returning whether the lock succeeded. void throwException(Throwable ee): throws an exception without telling the verifier. final boolean compareAndSwapInt(Object o, long offset, int expected, int x): updates a variable to x if it is holding expected, returning whether the operation succeeded. (There are corresponding compareAndSwapLong() and compareAndSwapObject() methods as well.) int getIntVolatile(Object o, long offset): volatile version of getInt(). (There are corresponding getBooleanVolatile(), getByteVolatile(), getShortVolatile(), getCharVolatile(), getLongVolatile(), getFloatVolatile(), getDoubleVolatile(), and getObjectVolatile() methods as well.) void putIntVolatile(Object o, long offset, int x): volatile version of putInt(). (There are corresponding putBooleanVolatile(), putByteVolatile(), putShortVolatile(), putCharVolatile(), putLongVolatile(), putFloatVolatile(), putDoubleVolatile(), and putObjectVolatile() methods as well.) void putOrderedInt(Object o, long offset, int x): version of putIntVolatile() not guaranteeing immediate visibility of storage to other threads. (There are corresponding putOrderedLong() and putOrderedObject() methods as well.) void unpark(Object thread): unblocks a thread. void park(boolean isAbsolute, long time): blocks the current thread. int getLoadAverage(double[] loadavg, int nelems): gets the load average in the system run queue assigned to available processors averaged over various periods of time. void invokeCleaner(ByteBuffe